YCA20D-E27 - Varilight The NEW Varilight Dimmer Dimmable Energy Saving Lamp with Edison screwed Fitting

VARILIGHT Switch Dimmable EnergySaver+ Lamp. This new 20W T3 spiral Dimmable EnergySaver+ CFL, can be dimmed using a standard dimmer switch from 2.46% to 100% brightness and is predicted to save the purchaser more than £100 on energy bills, during its 16000 hour lifetime, compared with an equivalent 100W GLS lamp. Combining the energy-saving properties of a CFL with the capacity to dim results in superb energy efficiency calculated to reduce carbon emissions by more than half a tonne with every GLS lamp replaced.

This is the Varilight Dimmer Dimmable Energy Saving Lamp with Edison (Screwed) fitting, which you are able to run using a light dimmer. If you are looking to buy the bayonet version, the stock code is yca20d-b22. This dimmer dimmable energy saving lamp can be used with dimmers only, for the switch dimmable version please see yca20s-e27.


Winner of 100% Design Awards: Most innovative lighting product of the year, this Sept.07. Go to http://www.greenpeace.org.uk/ to see a short film, 'seeing the lights at Earls Court', featuring the display of Varilight Energy Saving Lamps by Greenpeace at the 100% Design Show.

The dimmer dimmable lamp (yca20d-b22 or yca20d-e27) can be used with most dimmers, but for best results please use the Varilight touch/remote dimmer that has a minimum wattage of 20watts. With these dimmers you are able to dim just 1 lamp and up to 24 lamps depending on the maximum wattage of the touch/remote dimmer chosen.

....................Now In Stock............................................



This version is the Varilight Dimmer Dimmable Energy Saving Lamp with Edison (screwed) fitting. If you would prefer the Varilight Dimmer Dimmable Energy Saving Lamp with bayonet fitting, please choose yca20d-b22.

The Dimmable Energy Saving Lamp produces an output of 1300 lumens. Further benefits are provided by the DigiFlux® digital dimming technology with excellent power factor correction delivering a power factor of over 0.95 for the Dimmable EnergySaver+. This compares with a power factor of less than 0.6 for most CFLs, which results in inefficient energy distribution and higher energy costs.

At a time when governments have energy-saving high on their agenda, and with energy costs soaring, we expect these new products to appeal to local authorities, industry and householders alike.

This light bulb is designed to be used with a standard domestic dimmer switch (with phase cut technology, leading or trailing edge). For optimum compatibility choose Varilight dimmer switches.

Check the loading limits of your dimmer: This energy saving light bulb is rated at 20W.
Please note that dimmer switches have minimum load limits. Therefore you must check the minimum load of your (usually on the rear of the dimmer or on the packaging) and make sure the minimum load is met. For example, if the dimmer has a minimum load of 40 watts (W) you need to use at least 2 Dimmable Energy saving light bulbs (2x20W = 40W).

Special Varilight low load dimmers are available with a minimum load of 20W if you want to use just one Dimmable Energy Saving lamp with a dimmer...Please look in the REMOTE DIMMERS Category, and choose any of these.

Also check the maximum load limit, so that if your dimmer has a maximum load limit of 250W then you can use a maximum of 12 Dimmable energy saving light bulbs (12 x 20W = 240W)



**Approximate values based on average usageThis dimmer dimmable energy saving lamp can be used with dimmers only, for the switch dimmable version please see yca20s-e27.

If you have any questions relating to the The NEW Varilight Dimmer Dimmable Energy Saving Lamp with Edison screwed Fitting (stockcode YCA20D-E27) that are not answered below please ask a new question. Alternatively you can use the contact form to speek to a member of the 1stopelectrics sales team.

There are no questions relating to this product: ask a new question