XDIT3S - Varilight 3G 1 or 2W 10A Classic Toggle Switch Dimension Screwless Iridium-Black

1G 13A Switched Socket Dimension Screwless Iridium-Black
1 Gang 13 Amp Switched Socket Dimension Screwless Iridium Black with Black and Iridium Black Insert (Double Pole)
Stockcode: XDI4BS Price: £9.07 inc. VAT

2G 13A Switched Socket Dimension Screwless Iridium-Black
2 Gang 13 Amp Switched Socket Dimension Screwless Iridium Black with Black and Iridium Black Insert (Double Pole)
Stockcode: XDI5BS Price: £11.21 inc. VAT

1G 1 or 2W 10A Classic Toggle Switch Dimension Screwless Iridium-Black
1 Gang 1 or 2 Way 10 Amp Toggle Switch Dimension Screwless Iridium Black
Stockcode: XDIT1S Price: £10.34 inc. VAT

2G 1 or 2W 10A Classic Toggle Switch Dimension Screwless Iridium-Black
2 Gang 1 or 2 Way 10 Amp Toggle Switch Dimension Screwless Iridium Black
Stockcode: XDIT2S Price: £14.93 inc. VAT

2 Amp Round Pin Plug Black
These Black Plugs are used in conjunction with Varilight's 2 Amp Sockets
Stockcode: 2APLUGB Price: £1.20 inc. VAT

1G 1x400W 1W, 2W or Multi-way Remote/Touch Dimension Screwless Iridium-Black
1 Gang 1 Way or (Multi-Way if used with slave) 400 Watt Remote and Touch Dimmer, with Trailing Edge Technology, Dimension Screwless Iridium Black (For Mains and Almost All Low Voltage Applications)
Stockcode: IDII401MS Price: £21.27 inc. VAT

Varilight Dimmer Dimmable Energy Saving Lamp with Bayonet Fitting
The New VARILIGHT Dimmer Dimmable EnergySaver+ Compact Fluorescent Lamp also known as an Energy Saving Lamp. During the lifetime of this light bulb (which is 16,000 hours) you can expect to save over £100 on energy bills and reduce CO2 emissions by half a tonne!** This product is a Dimmable Energy Saving Bulb or Lamp that can be controlled by using a standard dimmer.

Winner of 100% Design Awards: Most innovative lighting product of the year, this Sept.07. Go to http://www.greenpeace.org.uk/ to see a short film, 'seeing the lights at Earls Court', featuring the display of Varilight Energy Saving Lamps by Greenpeace at the 100% Design Show.

The dimmer dimmable lamp (YCA20D-B22 or YCA20D-E27) can be used with most dimmers, but for best results please use the Varilight touch/remote dimmer that has a minimum wattage of 20watts. With these dimmers you are able to dim just 1 lamp and up to 24 lamps depending on the maximum wattage of the touch/remote dimmer chosen.

******Now In Stock************

This version is the Varilight Dimmer Dimmable Energy Saving Lamp with bayonet fitting which you are able to run using a light dimmer. If you would prefer the Varilight Dimmer Dimmable Energy Saving Lamp with Edison (Screwed) fitting, please choose YCA20D-E27. This dimmer dimmable energy saving lamp can be used with dimmers only, for the switch dimmable version please see YCA20S-B22.

The Dimmable Energy Saving Lamp produces an output of 1300 lumens. Further benefits are provided by the DigiFlux® digital dimming technology with excellent power factor correction delivering a power factor of over 0.95 for the Dimmable EnergySaver+. This compares with a power factor of less than 0.6 for most CFLs, which results in inefficient energy distribution and higher energy costs.

At a time when governments have energy-saving high on their agenda, and with energy costs soaring, we expect these new products to appeal to local authorities, industry and householders alike.

This light bulb is designed to be used with a standard domestic dimmer switch (with phase cut technology, leading or trailing edge). For optimum compatibility choose Varilight dimmer switches.

Check the loading limits of your dimmer: This energy saving light bulb is rated at 20W.
Please note that dimmer switches have minimum load limits. Therefore you must check the minimum load of your (usually on the rear of the dimmer or on the packaging) and make sure the minimum load is met. For example, if the dimmer has a minimum load of 40 watts (W) you need to use at least 2 Dimmable Energy saving light bulbs (2x20W = 40W).

Special Varilight low load dimmers are available with a minimum load of 20W if you want to use just one Dimmable Energy Saving lamp with a dimmer...Please look in the REMOTE DIMMERS Category, and choose any of these.

Also check the maximum load limit, so that if your dimmer has a maximum load limit of 250W then you can use a maximum of 12 Dimmable energy saving light bulbs (12 x 20W = 240W)



**Approximate values based on average usage

Coming Soon:
In addition to dimmable CFLs, the DigiFlux® range will include fully dimmable ballasts for linear fluorescent lamps (LFLs) that avoid the disadvantages of traditional 1-10V systems by using standard two-wire control not requiring additional control cabling. These too will be available either to be controlled by a dimmer or by a standard light switch and will extend lamp life significantly. A special sequencing version is also planned, designed for illuminated point-of-sale and advertisements. The ballast will cycle the brightness accordingly to a pre-programmed a time sequence.
Stockcode: YCA20D-B22 Price: £11.99 inc. VAT

Varilight Dimmer Dimmable Energy Saving Lamp with Edison (Screwed) Fitting
VARILIGHT Switch Dimmable EnergySaver+ Lamp. This new 20W T3 spiral Dimmable EnergySaver+ CFL, can be dimmed using a standard dimmer switch from 2.46% to 100% brightness and is predicted to save the purchaser more than £100 on energy bills, during its 16000 hour lifetime, compared with an equivalent 100W GLS lamp. Combining the energy-saving properties of a CFL with the capacity to dim results in superb energy efficiency calculated to reduce carbon emissions by more than half a tonne with every GLS lamp replaced.

This is the Varilight Dimmer Dimmable Energy Saving Lamp with Edison (Screwed) fitting, which you are able to run using a light dimmer. If you are looking to buy the bayonet version, the stock code is YCA20D-B22. This dimmer dimmable energy saving lamp can be used with dimmers only, for the switch dimmable version please see YCA20S-E27.


Winner of 100% Design Awards: Most innovative lighting product of the year, this Sept.07. Go to http://www.greenpeace.org.uk/ to see a short film, 'seeing the lights at Earls Court', featuring the display of Varilight Energy Saving Lamps by Greenpeace at the 100% Design Show.

The dimmer dimmable lamp (YCA20D-B22 or YCA20D-E27) can be used with most dimmers, but for best results please use the Varilight touch/remote dimmer that has a minimum wattage of 20watts. With these dimmers you are able to dim just 1 lamp and up to 24 lamps depending on the maximum wattage of the touch/remote dimmer chosen.

....................Now In Stock............................................



This version is the Varilight Dimmer Dimmable Energy Saving Lamp with Edison (screwed) fitting. If you would prefer the Varilight Dimmer Dimmable Energy Saving Lamp with bayonet fitting, please choose YCA20D-B22.

The Dimmable Energy Saving Lamp produces an output of 1300 lumens. Further benefits are provided by the DigiFlux® digital dimming technology with excellent power factor correction delivering a power factor of over 0.95 for the Dimmable EnergySaver+. This compares with a power factor of less than 0.6 for most CFLs, which results in inefficient energy distribution and higher energy costs.

At a time when governments have energy-saving high on their agenda, and with energy costs soaring, we expect these new products to appeal to local authorities, industry and householders alike.

This light bulb is designed to be used with a standard domestic dimmer switch (with phase cut technology, leading or trailing edge). For optimum compatibility choose Varilight dimmer switches.

Check the loading limits of your dimmer: This energy saving light bulb is rated at 20W.
Please note that dimmer switches have minimum load limits. Therefore you must check the minimum load of your (usually on the rear of the dimmer or on the packaging) and make sure the minimum load is met. For example, if the dimmer has a minimum load of 40 watts (W) you need to use at least 2 Dimmable Energy saving light bulbs (2x20W = 40W).

Special Varilight low load dimmers are available with a minimum load of 20W if you want to use just one Dimmable Energy Saving lamp with a dimmer...Please look in the REMOTE DIMMERS Category, and choose any of these.

Also check the maximum load limit, so that if your dimmer has a maximum load limit of 250W then you can use a maximum of 12 Dimmable energy saving light bulbs (12 x 20W = 240W)



**Approximate values based on average usageThis dimmer dimmable energy saving lamp can be used with dimmers only, for the switch dimmable version please see YCA20S-E27.
Stockcode: YCA20D-E27 Price: £11.99 inc. VAT

Shop By Type » Switches » 1 or 2 Way

Shop By Insert Finish » Decorative Insert

Shop By Type » Switches » 3 Gang

Shop By Type » Switches » Toggle

Shop By Type » Dimension

Shop By Type » Dimension Screwless

Shop By Plate Finish » Dimension » Screwless » Iridium Black