IVT252M - Varilight 2G 2x250W 1W, 2W or Multi-way Touch Victorian Brass

This ® Touch Dimmer Switch uses the latest Trailing Edge Technology providing many more functions than any other dimmerswitch.



Like all our products the ® Touch Dimmers are designed to meet the latest European Safety Legislation.



As the name suggests you can dim these products by touch.



Like all our Touch/Remotes, they are suitable for 1-way circuits only, unless they are used in combination with 1 or more of our touch control Dimming Slaves which enables you to dim the same lights from 2 or more switch locations in a 2-way or multi-way circuit.



The Touch Dimmer can be used for mains incandescent GLS lamps (standard mains light bulbs), maximum load as specified on dimmer. It can also dim GU10 or similar Hi Spot Mains Halogen lamps (only use quality UK supplied lamps) maximum load as specified on dimmer. By using Touch dimmers there is a zero risk of damage in case of lamp failure and a dramatically improved lamp life.



If you are using the dimmer with quality low voltage transformers such as ® low voltage transformers (product codes: yt50l, yt70L, yt105, yt150, yt250) or other electronic low voltage transformers, you can control them up to maximum load as specified on the dimmer.



Please note Touch dimmers do not dim wire-wound low voltage transformers, choose the Intelligent Dimmer (IQ Dimmer) or alternatively look at the 630 Watt Low Voltage Dimmer to dim this type of transformer.



The Touch Dimmers also do not dim fans and inductive loads, choose the Intelligent Dimmer (IQ Dimmer) or look at Fan Regulators for these awkward loads, [please check with manufacturer that appliance is dimmable].

If you have any questions relating to the 2G 2x250W 1W, 2W or Multi-way Touch Victorian Brass (stockcode IVT252M) that are not answered below please ask a new question. Alternatively you can use the contact form to speek to a member of the 1stopelectrics sales team.

There are no questions relating to this product: ask a new question